JPG Bearing

Single Row Angular Contact Ball Bearings mainly used for undertaking combined load both from radius and axle and also for pure axle load, rotator speed is high.
Material of bearings is choosed on refining bearing steel GCr15 (100Cr6, SUJ2, S2100) and other type of bearing stell, balls are adopting GCr15 (100Cr6, SUJ2, S2100) or ceramic.
The bearings are classified as 7000C (15°), 70000AC (25°) , 7000B(40°) in accordance with their contact angle, other bearings with different contact angular are available on request.

(mm)			Designation	(KN)		(rpm)		(kg)
Principal Dimensions				Basic Load Ratings		Limited Speed		Weight
d	D	B		Cr	Cor	Grease	Oil	≈
d	D	B		Dynamic	Static	Grease	Oil
10	26	8	7000C	4.9	2.1	24000	32000	0.019
	26	8	7000AC	4.7	2.1	24000	32000	0.019
	30	9	7200C	5.8	2.9	22000	28000	0.032
	30	9	7200AC	5.5	2.8	22000	28000	0.032
	30	9	7200B	5.3	2.7	19000	27000	0.03
	35	11	7300C	9.8	4.6	19000	26000	0.053
	35	11	7300AC	9.5	4.4	18000	26000	0.053
12	24	6	7901C	3.3	1.8	18000	36000	0.011
	24	6	7901AC	3.2	1.7	28000	36000	0.011
	28	8	7001C	4.5	2.6	28000	28000	0.021
	28	8	7001AC	4.1	2.4	22000	28000	0.021
	32	10	7201C	7.9	3.8	22000	25000	0.037
	32	10	7201AC	7.6	3.6	20000	25000	0.037
	32	10	7201B	6.9	3.2	20000	24000	0.036
	37	12	7301C	11.8	5.6	18000	24000	0.06
	37	12	7301AC	11.5	5.4	17000	24000	0.06
	37	12	7301B	10.5	4.9	17000	22000	0.06
15	28	7	7902C	4.7	2.6	16000	32000	0.015
	28	7	7902AC	4.5	2.5	24000	32000	0.015
	32	9	7002C	6.2	3.3	24000	25000	0.03
	32	9	7002AC	5.9	3.2	19000	25000	0.03
	35	11	7202C	9.2	4.9	19000	22000	0.045
	35	11	7202AC	8.9	4.8	17000	22000	0.045
	35	11	7202B	7.9	4.2	17000	22000	0.045
	42	13	7302C	13.2	6.7	16000	21000	0.084
	42	13	7302AC	12.5	6.2	15000	21000	0.084
	42	13	7302B	12.4	6.5	15000	19000	0.08
17	30	7	7903C	5	2.8	14000	30000	0.017
	30	7	7903AC	4.8	2.7	22000	30000	0.017
	35	10	7003C	6.6	3.6	22000	22000	0.04
	35	10	7003AC	6.3	3.6	16000	22000	0.04
	40	12	7203C	10.8	5.8	15000	20000	0.062
	40	12	7203AC	10.4	5.6	15000	20000	0.062
	40	12	7203B	9.9	5.5	14000	19000	0.065
☆We reserve the right to change specifications and other information included in this catalogue without notice.

Angular Contact Ball Bearing
Bearing type	Basic size			Limit speed(r/min)		Rated load		Reference weight
Bearing type	Principal dimensions			Speed ratings		Basic load ratings		(kg)
Bearing NO.	d	D	B	Grease	Oil	(kN)	(kN)	Mass
Bearing NO.	d	D	B	Grease	Oil	Dynamic	Static	Mass
7000AC	10	26	8	19000	28000	4.75	2.12	0.018
7000C	10	26	8	19000	28000	4.92	2.25	0.018
7001AC	12	28	8	18000	26000	5.2	2.55	0.02
7001C	12	28	8	18000	26000	5.42	2.65	0.02
7002AC	15	32	9	17000	24000	5.95	3.25	0.028
7002C	15	32	9	17000	24000	6.25	3.42	0.028
7003AC	17	35	10	16000	22000	6.3	3.68	0.036
7003C	17	35	10	16000	22000	6.6	3.85	0.036
7004AC	20	42	12	14000	19000	10	5.78	0.064
7004C	20	42	12	14000	19000	10.5	6.08	0.064
7005AC	25	47	12	12000	17000	11.2	7.08	0.074
7005C	25	47	12	12000	17000	11.5	7.45	0.074
7006AC	30	55	13	9500	14000	14.5	9.85	0.11
7006C	30	55	13	9500	14000	15.2	10.2	0.11
7007AC	35	62	14	8500	12000	18.5	13.5	0.15
7008AC	40	68	15	15000	21000	16	12.9	0.21
7009C	45	75	16	14000	19000	19.87	16.36	0.24
7009AC	45	75	16	14000	19000	19.87	16.36	0.24
7010C	50	80	16	13000	17000	21	19	0.26
7010AC	50	80	16	13000	17000	21	19	0.26
7011C	55	90	18	12000	15000	26.1	22.6	0.36
7011AC	55	90	18	12000	15000	26.1	22.6	0.36
7012C	60	95	18	11000	14000	32.5	27	0.45
7012AC	60	95	18	11000	14000	32.5	27	0.45
7013C	65	100	18	9900	13000	35.2	30	0.5
7013AC	65	100	18	9900	13000	35.2	30	0.5
7014C	70	110	20	9200	12000	41.1	37.3	0.59
7014AC	70	110	20	9200	12000	41.1	37.3	0.59
7015C	75	115	20	8600	11000	42.5	40.7	0.69
7015AC	75	115	20	8600	11000	42.5	40.7	0.69
7016C	80	125	22	8000	11000	53.4	50.6	0.93
7016AC	80	125	22	8000	11000	53.4	50.6	0.93
7017C	85	130	22	7600	10000	54.6	53.7	0.95
7017AC	85	130	22	7600	10000	54.6	53.7	0.95
7018C	90	140	24	7100	9500	68.6	65.4	0.96
7018AC	90	140	24	7100	9500	68.6	65.4	0.96
7019C	95	145	24	6800	9000	73.5	73	1.17
7019AC	95	145	24	6800	9000	73.5	73	1.17
7020C	100	150	24	6400	8600	75.5	77	1.25
7020AC	100	150	24	6400	8600	75.5	77	1.25
7021C	105	160	26	6100	8100	88	89.5	1.53
7021AC	105	160	26	6100	8100	88	89.5	1.53
7022C	110	170	28	5800	7700	101	101	1.91
7022AC	110	170	28	5800	7700	101	101	1.91
7024C	120	180	28	5300	7100	103	108	2.04
7024AC	120	180	28	5300	7100	103	108	2.04
7026C	130	200	33	4900	6500	129	137	3.73
7026AC	130	200	33	4900	6500	129	137	3.73
7028C	140	210	33	4500	6000	132	145	3.96
7028AC	140	210	33	4500	6000	132	145	3.96
7030C	150	225	35	4200	5600	151	168	4.82
7030AC	150	225	35	4200	5600	151	168	4.82
7200AC	10	30	9	18000	26000	5.58	2.82	0.03
7200C	10	30	9	18000	26000	5.82	2.95	0.03
7201AC	12	32	10	17000	24000	7.1	3.35	0.035
7201C	12	32	10	17000	24000	7.35	3.52	0.035
7202AC	15	35	11	16000	22000	8.35	4.4	0.043
7202C	15	35	11	16000	22000	8.68	4.62	0.043
7203AC	17	40	12	15000	20000	10.5	5.65	0.062
7203C	17	40	12	15000	20000	10.8	5.95	0.062
7204C	20	47	14	25000	34000	15	8.6	0.1
7204AC	20	47	14	25000	34000	15	8.6	0.1
7204B	20	47	14	25000	34000	13.31	7.65	0.12
7205C	25	52	15	21000	28000	16.2	10.3	0.13
7205AC	25	52	15	21000	28000	16.2	10.3	0.13
7205B	25	52	15	21000	28000	14.03	8.63	0.14
7206C	30	62	16	18000	24000	16.94	12.14	0.2
7210C	50	90	20	12000	15000	32.91	26.83	0.45
7210AC	50	90	20	12000	15000	32.91	26.83	0.45
7211AC	55	100	21	11000	14000	40.71	33.96	0.6
7212AC	60	110	22	9700	13000	46.9	40.53	0.81
7213AC	65	120	23	9000	12000	53.67	46.22	1.01
7214AC	70	125	24	8300	11000	56.04	49.52	1.08
7215AC	75	130	25	7800	10000	60.91	54.34	1.68
7216AC	80	140	26	7300	9700	68.81	63.35	1.48
7217AC	85	150	28	6900	9100	77.5	72.6	1.88
7218AC	90	160	30	6500	8600	89.91	82.6	2.26
7219AC	95	170	32	6100	8100	96.5	88.8	2.78
7220AC	100	180	34	5800	7700	111.2	96.8	3.32
7221AC	105	190	36	5500	7300	119.2	105.6	3.95
7222AC	110	200	38	5200	6900	129.6	118.4	4.65
7224AC	120	215	40	4800	6400	139.2	132.8	5.49
7226AC	130	230	40	4400	5800	156.8	156.8	6.21
7228AC	140	250	42	4000	5300	174.4	187.2	7.76
7230AC	150	270	45	3700	5000	248	280	9.75
7232AC	160	290	48	2400	2600	230	263	12.1
7234AC	170	310	52	2400	2400	272	331	15.1
7236AC	180	320	52	2200	2400	303	390	18.1
7238AC	190	340	55	2000	2200	303	390	18.8
7240AC	200	360	59	1800	2000	324	423	22.4

Double Row Angular Contact Ball Bearings

Double Row Angular Contact Ball Bearings mainly used for undertaking combined load both from radius and axle and also for pure axle load, rotator speed is high.
Material of bearings is choosed on refining bearing steel GCr15 (100Cr6, SUJ2, S2100) and other type of bearing stell, balls are adopting GCr15 (100Cr6, SUJ2, S2100) or ceramic.

(mm)			Designation	(KN)		(rpm)		(kg)
Principal Dimensions				Basic Load Ratings		Limited Speed		Weight
d	D	B		Cr	Cor	Grease	Oil	≈
d	D	B		Dynamic	Static	Grease	Oil
10	26	12	3000A	5.5	3.2	18000	23000	0.022
	26	12	3000A-2RS	5.5	3.2	18000	-	0.022
	26	12	3000A-2Z	5.5	3.2	18000	-	0.022
	30	14.3	3200A	7.5	4.3	16000	21000	0.05
	30	14.3	3200A-2RS	7.5	4.3	16000	-	0.05
	30	14.3	3200A-2Z	7.5	4.3	16000	-	0.05
12	28	12	3001A	6.1	3.7	17000	22000	0.025
	28	12	3001A-2RS	6.1	3.7	17000	-	0.025
	28	12	3001A-2Z	6.1	3.7	17000	-	0.025
	32	15.9	3201A	9	4.9	14000	19000	0.058
	32	15.9	3201A-2RS	9	4.9	14000	-	0.058
	32	15.9	3201A-2Z	9	4.9	14000	-	0.058
15	32	13	3002A	8.5	5.4	14500	18000	0.036
	32	13	3002A-2RS	8.5	5.4	14500	-	0.036
	32	13	3002A-2Z	8.5	5.4	14500	-	0.036
	35	15.9	3202A	10	6	11000	16000	0.066
	35	15.9	3202A-2RS	10	6	11000	-	0.066
	35	15.9	3202A-2Z	10	6	11000	-	0.066
	42	19	3302A	14	8	10000	15000	0.13
	42	19	3302A-2RS	14	8	10000	-	0.13
	42	19	3302A-2Z	14	8	10000	-	0.13
17	35	14	3003A	9	6	12500	16000	0.042
	35	14	3003A-2RS	9	6	12500	-	0.042
	35	14	3003A-2Z	9	6	12500	-	0.042
	40	17.5	3203A	12.7	7.8	9000	14000	0.096
	40	17.5	3203A-2RS	12.7	7.8	9000	-	0.096
	40	17.5	3203A-2Z	12.7	7.8	9000	-	0.096
	47	22.2	3303A	17.3	10.4	8000	12000	0.18
	47	22.2	3303A-2RS	17.3	10.4	8000	-	0.18
	47	22.2	3303A-2Z	17.3	10.4	8000	-	0.18
20	32	10	3804A	4.9	3.9	13000	14300	0.02
	32	10	3804A-2RS	4.9	3.9	13000	-	0.02
	32	10	3804A-2Z	4.9	3.9	13000	-	0.02
	37	13	3904A	9.3	6.6	12000	13200	0.046
	37	13	3904A-2RS	9.3	6.6	12000	-	0.046
	37	13	3904A-2Z	9.3	6.6	12000	-	0.046
20	42	16	3004A	14.2	9.6	11000	13000	0.08
	42	16	3004A-2RS	14.2	9.6	11000	-	0.08
	42	16	3004A-2Z	14.2	9.6	11000	-	0.08
	47	20.6	3204A	19	12.1	8000	12000	0.16
	47	20.6	3204A-2RS	19	12.1	8000	-	0.16
	47	20.6	3204A-2Z	19	12.1	8000	-	0.16
	52	22.2	3304A	19	12.3	8500	12000	0.22
	52	22.2	3304A-2RS	19	12.3	8500	-	0.22
	52	22.2	3304A-2Z	19	12.3	8500	-	0.22
25	37	10	3805A	5.5	4.9	11500	12700	0.025
	37	10	3805A-2RS	5.5	4.9	11500	-	0.025
	37	10	3805A-2Z	5.5	4.9	11500	-	0.025
	42	13	3905A	9.6	7.5	11000	12300	0.062
	42	13	3905A-2RS	9.6	7.5	11000	-	0.062
	42	13	3905A-2Z	9.6	7.5	11000	-	0.062
	47	16	3005A	15.2	11	9500	12000	0.1
	47	16	3005A-2RS	15.2	11	9500	-	0.1
	47	16	3005A-2Z	15.2	11	9500	-	0.1
	52	20.6	3205A	20.6	13.9	7500	10000	0.19
	52	20.6	3205A-2RS	20.6	13.9	7500	-	0.19
	52	20.6	3205A-2Z	20.6	13.9	7500	-	0.19
	62	25.4	3305A	27.6	17.8	7500	10000	0.367
	62	25.4	3305A-2RS	27.6	17.8	7500	-	0.367
	62	25.4	3305A-2Z	27.6	17.8	7500	-	0.367
30	42	10	3806A	5.7	5.6	10000	11500	0.03
	42	10	3806A-2RS	5.7	5.6	10000	-	0.03
	42	10	3806A-2Z	5.7	5.6	10000	-	0.03
	47	13	3906A	9.9	8.3	9500	10500	0.095
	47	13	3906A-2RS	9.9	8.3	9500	-	0.095
	47	13	3906A-2Z	9.9	8.3	9500	-	0.095
	55	19	3006A	20.3	15.5	8000	10000	0.16
	55	19	3006A-2RS	20.3	15.5	8000	-	0.16
	55	19	3006A-2Z	20.3	15.5	8000	-	0.16
	62	23.8	3206A	25.7	18.5	6300	8500	0.31
	62	23.8	3206A-2RS	25.7	18.5	6300	-	0.31
	62	23.8	3206A-2Z	25.7	18.5	6300	-	0.31
30	72	30.2	3306A	37.2	25.9	6000	8000	0.59
	72	30.2	3306A-2RS	37.2	25.9	6000	-	0.59
	72	30.2	3306A-2Z	37.2	25.9	6000	-	0.59
35	47	10	3807A	6.1	6.2	8500	10000	0.035
	47	10	3807A-2RS	6.1	6.2	8500	-	0.035
	47	10	3807A-2Z	6.1	6.2	8500	-	0.035
	55	15	3907A	12.9	11.3	8000	9500	0.138
	55	15	3907A-2RS	12.9	11.3	8000	-	0.138
	55	15	3907A-2Z	12.9	11.3	8000	-	0.138
	62	20	3007A	24.2	20.4	6500	8500	0.24
	62	20	3007A-2RS	24.2	20.4	6500	-	0.24
	62	20	3007A-2Z	24.2	20.4	6500	-	0.24
	72	27	3207A	30.4	23.5	5600	7500	0.51
	72	27	3207A-2RS	30.4	23.5	5600	-	0.51
	72	27	3207A-2Z	30.4	23.5	5600	-	0.51
	80	34.9	3307A	46.1	35.3	5300	7000	0.82
	80	34.9	3307A-2RS	46.1	35.3	5300	-	0.82
	80	34.9	3307A-2Z	46.1	35.3	5300	-	0.82
40	52	10	3808A	6.4	6.9	7000	8500	0.04
	52	10	3808A-2RS	6.4	6.9	7000	-	0.04
	52	10	3808A-2Z	6.4	6.9	7000	-	0.04
	62	16	3908A	17.4	15.8	6500	8000	0.158
	62	16	3908A-2RS	17.4	15.8	6500	-	0.158
	62	16	3908A-2Z	17.4	15.8	6500	-	0.158
	68	21	3008A	24.5	20.8	6000	7800	0.279
	68	21	3008A-2RS	24.5	20.8	6000	-	0.279
	68	21	3008A-2Z	24.5	20.8	6000	-	0.279
	80	30.2	3208A	40.8	30.2	5300	7000	0.64
	80	30.2	3208A-2RS	40.8	30.2	5300	-	0.64
	80	30.2	3208A-2Z	40.8	30.2	5300	-	0.64
	90	36.5	3308A	54.9	40.1	4800	6300	1.06
	90	36.5	3308A-2RS	54.9	40.1	4800	-	1.06
	90	36.5	3308A-2Z	54.9	40.1	4800	-	1.06
45	58	10	3809A	6.7	7.7	6300	7000	0.055
	58	10	3809A-2RS	6.7	7.7	6300	-	0.055
	58	10	3809A-2Z	6.7	7.7	6300	-	0.055
45	68	16	3909A	17.9	17.2	6000	6800	0.183
	68	16	3909A-2RS	17.9	17.2	6000	-	0.183
	68	16	3909A-2Z	17.9	17.2	6000	-	0.183
	75	23	3009A	39.3	36.4	5600	6200	0.364
	75	23	3009A-2RS	39.3	36.4	5600	-	0.364
	75	23	3009A-2Z	39.3	36.4	5600	-	0.364
	85	30.2	3209A	42.8	34.5	4800	6300	0.72
	85	30.2	3209A-2RS	42.8	34.5	4800	-	0.72
	85	30.2	3209A-2Z	42.8	34.5	4800	-	0.72
	100	39.7	3309A	72.1	52	4300	5600	1.24
	100	39.7	3309A-2RS	72.1	52	4300	-	1.24
	100	39.7	3309A-2Z	72.1	52	4300	-	1.24
50	65	12	3810A	7	8.4	6000	7500	0.075
	65	12	3810A-2RS	7	8.4	6000	-	0.075
	65	12	3810A-2Z	7	8.4	6000	-	0.075
	72	16	3910A	19.1	19.6	5800	7200	0.189
	72	16	3910A-2RS	19.1	19.6	5800	-	0.189
	72	16	3910A-2Z	19.1	19.6	5800	-	0.189
	80	23	3010A	42.3	41.9	5300	6600	0.395
	80	23	3010A-2RS	42.3	41.9	5300	-	0.395
	80	23	3010A-2Z	42.3	41.9	5300	-	0.395
	90	30.2	3210A	43.2	35.3	4500	6000	0.78
	90	30.2	3210A-2RS	43.2	35.3	4500	-	0.78
	90	30.2	3210A-2Z	43.2	35.3	4500	-	0.78
	110	44.4	3310A	84.9	62.6	4000	5300	1.96
	110	44.4	3310A-2RS	84.9	62.6	4000	-	1.96
	110	44.4	3310A-2Z	84.9	62.6	4000	-	1.96
55	72	13	3811A	12.8	14.4	5500	6500	0.01
	72	13	3811A-2RS	12.8	14.4	5500	-	0.01
	72	13	3811A-2Z	12.8	14.4	5500	-	0.01
	80	19	3911A	20	21.7	5300	6200	0.282
	80	19	3911A-2RS	20	21.7	5300	-	0.282
	80	19	3911A-2Z	20	21.7	5300	-	0.282
	90	26	3011A	43.7	44.7	4800	5800	0.581
	90	26	3011A-2RS	43.7	44.7	4800	-	0.581
	90	26	3011A-2Z	43.7	44.7	4800	-	0.581
55	100	33.3	3211A	53.9	47.2	4000	5300	1.03
	100	33.3	3211A-2RS	53.9	47.2	4000	-	1.03
	100	33.3	3211A-2Z	53.9	47.2	4000	-	1.03
	120	49.2	3311A	106.3	82	3600	4800	2.4
	120	49.2	3311A-2RS	106.3	82	3600	-	2.4
	120	49.2	3311A-2Z	106.3	82	3600	-	2.4
60	78	14	3812A	13.6	16.2	5000	5500	0.14
	78	14	3812A-2RS	13.6	16.2	5000	-	0.14
	78	14	3812A-2Z	13.6	16.2	5000	-	0.14
	85	19	3912A	21	23.8	4800	5300	0.303
	85	19	3912A-2RS	21	23.8	4800	-	0.303
	85	19	3912A-2Z	21	23.8	4800	-	0.303
	95	26	3012A	47.2	53.4	4400	5000	0.621
	95	26	3012A-2RS	47.2	53.4	4400	-	0.621
	95	26	3012A-2Z	47.2	53.4	4400	-	0.621
	110	36.5	3212A	61.3	52.6	3800	5000	1.4
	110	36.5	3212A-2RS	61.3	52.6	3800	-	1.4
	110	36.5	3212A-2Z	61.3	52.6	3800	-	1.4
	130	54	3312A	121.4	95.1	3400	4500	3.24
	130	54	3312A-2RS	121.4	95.1	3400	-	3.24
	130	54	3312A-2Z	121.4	95.1	3400	-	3.24
65	85	15	3813A	15.1	18.3	4700	5200	0.182
	85	15	3813A-2RS	15.1	18.3	4700	-	0.182
	85	15	3813A-2Z	15.1	18.3	4700	-	0.182
	90	19	3913A	21.4	24.8	4500	5000	0.324
	90	19	3913A-2RS	21.4	24.8	4500	-	0.324
	90	19	3913A-2Z	21.4	24.8	4500	-	0.324
	100	26	3013A	49.5	59.2	4000	4800	0.661
	100	26	3013A-2RS	49.5	59.2	4000	-	0.661
	100	26	3013A-2Z	49.5	59.2	4000	-	0.661
	120	38.1	3213A	73.4	66.6	3400	4500	1.84
	120	38.1	3213A-2RS	73.4	66.6	3400	-	1.84
	120	38.1	3213A-2Z	73.4	66.6	3400	-	1.84
	140	58.7	3313A	137.5	109.6	2800	3700	3.9
	140	58.7	3313A-2RS	137.5	109.6	2800	-	3.9
	140	58.7	3313A-2Z	137.5	109.6	2800	-	3.9
70	90	15	3814A	18	21.9	4400	4800	0.19
	90	15	3814A-2RS	18	21.9	4400	-	0.19
	90	15	3814A-2Z	18	21.9	4400	-	0.19
	100	23	3914A	25.8	30	4000	4600	0.516
	100	23	3914A-2RS	25.8	30